London Art Biennale
EN

The principle

Our team opens every package with care, keeps the packaging for the length of the exhibition, and uses it again for the return.

Whether a work travels in a tube, a cardboard box or a wooden crate, the packaging should open and close again without being damaged, and protect the work just as well on the way back.


Rolled canvas, in a tube

  • Let the paint dry completely before rolling. Oil paint can need several weeks, and longer where it is thick.
  • Roll the canvas with the painted side facing out, loosely and evenly, preferably around a smaller tube that then goes inside the outer one, and with a sheet of glassine, silicone release paper or acid-free tissue over the painted surface. Never fold it. For the return, our team always re-rolls the canvas with silicone release paper.
  • For the outer tube, use a rigid tube of cardboard or plastic, at least 10 cm across, and wider for heavily worked surfaces. It should be a few centimetres longer than the canvas at each end.
  • Close both ends with end caps, taped shut if you wish.
  • Leave at least 7 cm of canvas beyond the image on every side, so that it can be stretched. The margin may be bare or painted, provided it is the edge you intend to be seen. Stretching is free up to 100 × 100 cm, including 40 × 40 in.

Boxes and crates

A box, whether cardboard or wood, must be reusable. It needs:

  • Rigid sides. In cardboard, double-wall corrugated board at the least; in wood, a crate of plywood or timber that holds its shape when lifted by one end.
  • An opening that closes again. A cardboard box should be sized so that the work, once soft-wrapped, slides in and out through its flaps. We open it by cutting the tape along the seam where the flaps meet, and tape it again for the return. A wooden crate should preferably open with a lid, though an opening on one of its large sides is acceptable too. Close a crate with screws rather than nails, so that it can be opened and closed again with the same screws.

Wrapping the work

  • Nothing sticky or textured should touch the surface. Wrap the work first, preferably in glassine, silicone release paper or acid-free tissue, then in bubble wrap with the bubbles facing out.
  • Do not wrap a recently painted work tightly in plastic, which traps moisture against the surface.
  • For glazed works, acrylic travels far more safely than glass. If the work is under glass, cross the glass with low-tack tape so that, if it breaks, the pieces stay in place and away from the work.
  • Never put tape directly on the artwork or its frame.

Sculpture and fragile work

  • Wrap each element separately and fix it in place in the box so that nothing can move or touch another piece. Cut foam to shape around delicate parts.
  • Number the elements of a work in several parts, and include a diagram or photograph of the work assembled.
  • Glass, ceramics and other fragile materials should travel in a box within a box: the wrapped work in an inner box, padded on every side inside a second, larger one.

Labelling

Labelling is essential: a work that cannot be identified cannot be hung or returned.

  • On the outside of the box or tube: your name and your submission number, with “this way up” where it matters.
  • On the soft-wrapped work inside: your name and your submission number again, so that the work can still be identified once it has been taken out of the box.
  • On the work itself: signed, labelled or titled on the back, or wherever is appropriate to the work. This is not necessary for sculpture.
  • Inside the package, a list of what it contains and any instructions for handling or unpacking.
  • Before closing the package, photograph each stage of packing. Sent with the work, or to the office, the photographs help our team pack it for its return as it came.

The shipping address and the delivery dates are sent to selected artists. Questions about packing go to the office through the contact form, and for anything unusual we are glad to advise before the work is sent.

Shipping, framing and return